Home
>
Products & Solutions
> Professional AV > Broadcast > Convertible Camera System
>
Pan-Tilt System Accessories
Main Contents begins from here.
Products & Solutions
Pan-Tilt System Accessories
AW-PH360
- 50 preset memories
- High performance:
- Quiet (Under NC30)
- Pan speed:(30°/sec) / Tilt speed:(25°/sec)
- Accuracy(+-3minutes) (0.05 degrees)
- Smooth starts and stops with soft landing function
AW-PH500
- 50 preset memories
- High performance:
- Quiet (Under NC40)
- Pan speed(15°/sec)
- Tilt speed(10°/sec)
- 50 preset memories
AW-PH400
- Pan range:400° Tilt range:190°
- Maximum pan/tilt speed:90°/sec(variable speed)
- Stop accuracy:Maximum 30 seconds (Approx.0.008 degrees)
WV-RC700A
- Component/Y/C and composite signals are available with this unit.
- Using a coaxial multiplex adapter (AW-ML600), control of camera/lens/pan-tilt head and receiving of sound/video signals are possible with one coaxial cable Belden8281.
- Can remotely control convertible camera settings, switching, and make precise adjustments.
AW-SW350
- 5 inputs(composite and YC) in compact body (half rack size)
- Three program outputs and one preview output
- Selectable bus switching system
AW-PH600+AW-CH600
- 50 preset memories
- High performance:
- Quiet (Under NC40)
- Pan speed(10°/sec)
- Tilt speed(8°/sec)
- In addition to zooming, panning and tilting functions, heater, wiper and defroster functions for the housing can also be controlled by the controller.
AW-RP605A
- Full camera control function
- 50 pre-set memories per camera
- 10 tracing memories (Memory time:max. 300seconds)
AW-RP400
- Changeable zoom/focus controller (joystick/seesaw)
- Joystick with camera roll control
- 50 preset positions
AW-RP505
- With 3 coaxial cables (Belden 8281) and a 10BASE-T (UTP Category 5) straight cable, all manner of camera and pan-tilt head operations can be accomplished, as well as transmission of video signals and genlock signals.
* In addition to the pan-tilt positions of the camera, lens settings for zoom, focus, and iris, as well as ATW, A/B white balance can be preset for easy switchover (maximum of 10 patterns). - Controls up to 5 sets of cameras and pan-tilt heads with Multi-port Hub Unit (AW-HB505).
AW-HB505
- In combination with AW-RP505, up to 5 camera pan-tilt systems can be controlled.
- A cable to connect this unit and a multi-hybrid control panel can be extended up to 10 m, and a cable between the main unit, and camera and pan-tilt head up to 1,640ft(500m).
WV-RC550
- Composite and Y/C signal are offered with this unit.
- Can remotely control a variety of convertible camera settings, switching, and make precise adjustments.
- 26-pin studio cable (WV-CA26U15, WV-CA26U30, WV-CA26U100) can be extended up to 100 meters using the joint Adapter WV-CA26T26.
Local navigation area begins from here.
Banner area begins from here.
