Home
>
Products & Solutions
> Professional AV > Security System > Video Recorder
> WJ-HD316A
Main Contents begins from here.
Products & Solutions
WJ-HD316A
- Where to Buy
- Catalogopens new window
- Printopens new window
| General | |
|---|---|
| Power Source | 220 V - 240 V AC, 50 Hz |
| Power Consumption | 75 W |
| Ambient Operating Temperature | +5°C - +45°C |
| Ambient Operating Humidity | Less than 90 % |
| Dimensions | 420 mm (W) x 88 mm (H) x 350 mm (D) |
| (excluding rubber feet and projections) | |
| Weight | 9.5 kg |
| Input/Output | |
| Video | |
| Video Input Connectors | 1 V [P-P] / 75 O, with auto termination loop-thru, vertical timing pulse multiplexed, x8 (1 to 8 CH) (BNC) |
| 1 V [P-P] / 75 O, with auto-termination loop-thru, x8 (9 to 16 CH) (BNC) | |
| Cascade Input Connector | 1 V [P-P] / 75 O (BNC) |
| Video Output Connectors | 1 V [P-P] / 75 O, active loop-thru output, x8 (1 to 8 CH) (BNC)*1 |
| 1 V [P-P] / 75 O, active loop-thru output, x8 (9 to 16 CH) (BNC) | |
| Monitor Output Connectors | 1 V [P-P] / 75 O, x2 (BNC) |
| Monitor Output Connector (VGA) | RGB output, x1 (15-pin D-sub) |
| S-Video Output Connector | Y = 1 V [P-P] / 75 O, C = 0.3 V [P-P] / 75 O, x1 (S-video output connector) |
| Video Output Connector (Front Panel) | 1 V [P-P] / 75 O, x1 (RCA pin) |
| Audio | |
| Audio Input Connectors | –10 dB, 10 KO, x4 (RCA pin) |
| Audio Output Connectors | –10 dB, 600 O, unbalanced, x2 (RCA pin) |
| Others | |
| Expansion Connector | Emergency recording input*², additional space warning output*³ (for devices connected to copy connectors), |
| HDD trouble output*³, camera trouble output*³,electricity failure recovery completion output*4, time adjustinput/output*5, | |
| electricity failure detection input*2,external recording mode switching*2 (25-pin D-sub), +5 V output*7 | |
| Alarm Port | 1 to 8 CH alarm input*6, 1 to 16 CH alarm input*2, 1 to 16 alarm |
| output*3, , alarm recovery input*2, alarm suspension input*5(25-pin D-sub) | |
| RS-485 Ports | RS-485 (full duplex/half duplex*8), x2 (RJ-11) |
| DATA Ports | RS-485, x2 (RJ-11) |
| SERIAL Connector | RS-232C, x1 (9-pin D-sub) |
| Ethernet Port | 10 Base-T/100 Base-TX (RJ-45) |
*1. When power is not supplied, video output signal was not sent from the unit even if video input signal
is supplied.
*2. Non-voltage N.O. Contact, 100 mA, +5 V pull-up
*3. Open collector output, maximum under conditions of 24 V DC and 100 mA or less
*4. High (+12 V, 6.3 mA)
*5. 30 KO, 5 V pull-up, –100 mA, N.O. Contact
*6. 5 V pull-up, –100 mA, Non-voltage N.O. Contact input
*7. 240 mA at maximum
*8. Changeable with the mode switch
is supplied.
*2. Non-voltage N.O. Contact, 100 mA, +5 V pull-up
*3. Open collector output, maximum under conditions of 24 V DC and 100 mA or less
*4. High (+12 V, 6.3 mA)
*5. 30 KO, 5 V pull-up, –100 mA, N.O. Contact
*6. 5 V pull-up, –100 mA, Non-voltage N.O. Contact input
*7. 240 mA at maximum
*8. Changeable with the mode switch
Local navigation area begins from here.
Banner area begins from here.
